It’ s a family of viruses called coronaviruses, that usually trigger a cold with a low-grade fever, dripping nose and sneezing.

The symptoms can develop into lung disease such as bronchitis.

Covid-19 is a recent virus characterized by a rapid transmission from human to human.

Currently, the mortality rate (% of deaths based on the identified infected population) is +/- 2%. On the other hand, the lethal rate (% of deaths per infected population) is less than 1% for the moment.

The difference between the two rates can be explained by a high proportion of the population who are infected without any of the following symptoms:

A fever that is present or not, cold perspirations, tiredness, a dry cough. Some people may also have aches and pains, headaches, chest pressure or breathlessness. Such symptoms are indicative of a respiratory infection or lung disease that is detected by radiology.

NB: Single-stranded, positive polarity RNA viruses use their genome directly as a messenger of RNA.

If you are new in Plasma technology, you can look at the Cup as replication of the energetic functions of human body.

For those advanced in technology: 1C1L is the replication of the Creation of life on earth.

Through this creation, we get the creation of the Soul, of the human being, understanding that this soul is the addition of all the subatomic souls, which are the totality of all of our cells within the body.

So, 1C1L works exactly as an entity on its own, to help us as the Creator of our reality. So it is necessary to focus full and entire intention on one purpose, such as our well-being and also mankind’s well-being in its totality, during its creation and beyond!

This means that our intention has to be like an ant in a colony, each one for itself and one for all!

The virus is a bundle of energy. The plasma water creates a condition of weaker strength. So the virus gives it its energy until it depletes itself.

More detailed answer: 1C1L acts on the virus in prevention and cure. It reverses the process of the virus and virus energy is finally drained. It is a replication of the energetic operation of the human body, at a lower level than the virus. In this way, the virus gives to the weaker (the plasma water), and so, it loses its energy.

At first the coronavirus affects the energetic side of your being. Then, in a second phase, it affects your physicality, the lung area of your body.

In the future, viruses which affect the muscles will very probably develop. (This type of virus will be more difficult to eradicate)

So you can see that 1C1L evolves in a similar way to coronavirus through its different phases!

Initially 1C1L will produce GANS matter of CO2 and ZnO2 (white colour), then CuO2. So production is available after +/- 3 hours of operation.

Remember that these 3 GANS (CO2, ZnO2 and CuO2) create magnetic and gravitational fields.

The CO2 and ZnO2 plasma water will protect the energetic (magnetic and gravitational) side of your being, which is your Soul.

In a second step 1C1L will create matter GANS of CuO2, making the GANS look like a light green colour. At this point the matter GANS will have the total potential to protect your physicality (your body). This means that CO2, ZnO2 and CuO2 plasma water will protect your being as a totality.

1C1L is initially set at 15% salinity.

Don’t forget to adjust the water level by adding 15% salt water to the One Cup One Life, after each Amino Acids and GANS retrieval.

In time, you will see some white crystals on the edge of 1C1L, this is salt from the environment.

During One Cup One Life production, you can collect these salts, by using a small spoon placed under the cup, for further applications.


Additional properties of 1C1L: antiviral and antibacterial.
1C1L produces 3 types of GANS: CO2 GANS, ZnO2 GANS and CuO2 GANS which is the most powerful anti infectious agent.

Yes, for most of the viruses (list undefined).
Does not work for HIV.

In case of food shortage, you can absorb amino acids in very small quantity to respond to the need of your body.

Yes, for any bacterial pathogen.

No, it’s more effective.

Yes, the reason is that amino acids are the molecular basis of any oil, and so of any essential oil. For this reason, AA can be supplemented with a specific essential oil (antiviral or antibacterial), using one drop.


Safety and security

The GANS in its matter state is the sediment at the bottom of the container, when the GANS is produced.

The power of GANS in its matter state is different from the power of plasma water!

The GANS matter is an energy package with a power level much higher than the human body can currently support.

Ingesting GANS matter means overloading the body’s energy system.

Overload means an excess of energy beyond the capacity of the system itself.

On the other hand, Plasma Water does not contain matter energy, but information through magnetic and gravitational fields.

So this plasma water is like a fruit seed holding the future potential of the plant. This means the full potential of the plant in terms of creating vitamins and minerals. So your body sees the plasma water as a fruit.

Regarding the absorption of a quantity of GANS, according to the quantity and according to your metabolism, your body does not have necessarily the capacity to release it. In this case it would be an overdose of energy.

In case your body is able to handle this situation, you will have a fever, because your body will struggle with this extra energy.

As with food, your body absorbs what it needs and rejects the rest.

Please be aware that to produce plasma water which is totally free of particles and absolutely clear, takes a long time, from several hours to several days.

This is very important! It is your responsibility to respect this!

Only in cases of high blood pressure from kidney sources.
In this case, we recommend additional rinsing of the GANS matter. And when you introduce your Amino Acids into the plasma water, make sure not to add the salt water to them.

No, as they do not drink the GANS matter.

If you follow all the instructions on the website and in the PDF file, 1C1L is non-toxic, non-corrosive, non-irritant, non-inflammable and non-explosive.

No. If you don’t drink the GANS matter.

Warning regarding the ingestion of this solution: According to the European regulation, this solution is not in the list of authorized for consumption. One Cup One Life (1C/1L) is an experimental solution.

It is recommended for consumption and only for the following usages: physical and chemical experiments and laboratory work.
It follows the regulatory framework for Chemicals Substances, which is not subject to REACH (European Chemicals Agency) registration.

The User of this solution agrees to assume responsibility for any other use he/she makes of it, in spite of the procedure described on the website and in the PDF file, and in spite of the present warning.

This solution is non-toxic, non-corrosive, non-irritant, non-inflammable and non-explosive.

As the impact of nanoparticles on the environment is still under investigation at the time of this writing, we are looking for further developments in research from official science to ensure exact conformity of the labelling by the relevant authorities.


To be clear, as pure as possible!

Of course, free of any lead for Zinc and free of aluminium for copper!

NB: Zinc-plated iron is not Zinc!

Zinc-plated iron and zinc look very similar! The best way to identify them is to use a magnet!

If the magnet sticks to the alloy, it is steel.
If the magnet does not stick, it may be zinc or aluminium.

Zinc is as heavy as galvanised iron!
Aluminium is lighter and has a lighter appearance than zinc!

You can find zinc :

– In DIY shops.
– In salt batteries or Zinc-Carbon batteries (used or not). Their shell is made of pure zinc ( you cannot find it in ALKALINE batteries!).
– In old rain gutters, but they may contain some lead or regule!

Take a couple of gloves, small pliers, a rag, a small hammer, a big pair of scissors or a shears for the sheet metal:

Procedure to do on a newspaper or similar!

– Remove the packaging from the battery
– Pull the plus (+) pole to remove the metal pad from the top
– Remove the 2nd packaging
– Remove the plastic pad on the plus (+) pole side
– Pull out the carbon core by rotating it from right to left and pulling it out
– Remove the cardboard disc
– Empty the battery of its black substance (manganese oxide) and store it in a bag
– Cut out the bottom of the shell and then the cylinder, to make a plate
– Then clean the zinc plate with some vinegar and salt and rinse with fresh water

Video tutorial :

Zinc containing lead is not visible to the eye.
Zinc containing lead is softer and can be darker than normal zinc. It becomes darker as it oxidizes with water.

If you heat a small piece of leaded zinc, you can see the presence of lead, as it melts faster than normal zinc. So you see lead pearling on the surface of the zinc, like melting tin (small chrome balls that rise to the surface as it heats up and re-enters the zinc as it cools).

The zinc will take a dark grey patina!

Melting point of lead 327C°.
Melting point of zinc 419C°.

Zinc regule has a bright zinc appearance, but is harder than normal zinc and it crackles to the ear when it is bent and is more brittle than zinc without regule. It can also have a yellow or light pink appearance! (lighter than copper)

Copper containing aluminium is not visible to the eye.

If you heat a small piece of copper, you can see the aluminium because it melts faster than the copper. So you see aluminium pearling and covering up the surface of the copper, very much like tin melting on copper.

Melting point of aluminium 660C°.
Melting point of copper 1085C°.

It’s necessary for the battery to be a used AA 1.5V battery (Alkaline or Saline or Zinc-Carbon or other…).

If you cannot check the power of your battery with a multimeter or battery tester, just to be sure:

1/ Check your battery is not dead (empty) with a telecommand.

2/ Increase the size of your recipient in term of diameter, which means the zinc plate and the copper coil will move away from the central nano coil, so you increase the resistance.

3/ With a new battery, you can use a second battery fully discharged. In this way, you put it in parallel with the new battery, to divide the energy of the new battery by half ( Refer to the diagram below).

Once your 1C1L is running, you”ll see bubbles coming out of the central nano-copper coil (like bubbling into glass water). If your battery is too strong you”ll see a yellow or orange colour, or even brown. In this case you can reset the 1C1L!


NB: In case of problems with this process, we recommend to use a double 1C1L, which doesn’t need a battery (The two 1C1L will power each other).

NB2: If you neither have a battery nor the possibility of creating two 1C1L, simply replace the battery with a 4th copper wire stripped between your connection wires N°3-4 and N°5 (green wire on the diagram). This process leads to a slower, but still effective production.

Make sure that the connecting wires are thick enough for this process.

Discharge it by creating a short-circuit:

In the water:

Do this (1st photo) for a few hours (between 4h and 12h), then let the battery rest for a few hours (between 4h and 12h). Make sure that the connections wires are thick enough for this process.


With a coil:

Short-circuit your battery with a shorting wire or coil (2nd photo) long enough not to heat up, for ± 2h to 4h. Make sure that the connections wires are thick enough for this process.

The capillarity of the water comes from the connection between the copper coil N°1 and the connection wire N°4, which are both multi-stranded!

To solve this small problem, you can attach a single-stranded hook between the spool and the connecting wire (See photo).


Yes, it is important not to place 1C1L on, or near, any metallic supports or objects! On a one meter radius!

You can place your 1C1L in your living room, bedroom, kitchen, bathroom ( throughout your house), ideally in a high place, out of children’s hands.

Do not place your 1C1L on, or near, any metallic supports or objects, as well as electromagnetic fields! On a one meter radius! (Iron table, microwave, mobile phone, wifi internet box ….)

AA are produced very quickly and continuously during the lifetime of 1C1L.

So you can collect AA at any time and store it all in the same container.

The AA are on the surface of 1C1L. At first you will see bubbles on the surface (like iridescent “multicoloured” soap microbubbles). Then one or several oily patches will appear and float on the surface of the water (these are the AA).

Collect them with a plastic spoon! The AA stick to the spoon, you can release them by pouring a little bit of fresh water on the spoon.

Depends on your 1C1L and the conditions you make it!

At first you”ll get GANS matter at the top and bottom of your recipient (CO2 at the bottom and ZnO2 at the top). And then, the two GANS will mix at the bottom of the recipient.

At this point, you can start to collect the GANS matter with a syringe.

It’ s important to keep some GANS at the bottom of the 1C1L recipient.

If possible, we recommend you to keep GANS as well as plasma water and AA in glass recipients.

If you don’t have any! Don’t use any metal or metal-containing recipients at all! And if possible, do not use plastic.


1C1L = One Cup One Life

The name 1C1L was chosen as it is personal. So it is important that every human has his own 1C1L. Because when you create it, you put your own intentions, energy and DNA into it.
In this way, it will be more appropriate to you, and therefore more effective.

However, this does not exclude its effectiveness in helping the others.

Also known as Nano, Nano Surfacing, Nano Coating.

Nano coating is a layer of carbon crystals created on the surface of copper, when you nano coat with a torch or caustic soda. (NAOH)

It changes the structure of the copper in a nanoscale dimension….

For more information, see the video in the link below…

Initials of GANS means Gas At Nano State = Gas in Nano Solid State (called GANS or GANS matter).

The two types of plasma water are:

– Plasma water which has been in physical contact with GANS.
– Plasma water which has been indirectly exposed to GANS.

In both cases, the water is structured. However, water in direct contact is more powerful, and is structured more quickly, so it is used in 1C1L.

Don’t forget! The 1C1L plasma water for application to yourself is produced from the final washing of the GANS.

Just a reminder:

The plasma water in recipient “D” will serve you for cleaning and protection of your house and for skin application in small amount! (Be careful, very powerful water)

The plasma water from the final washing is used for drinking, but also for skin applications.